AM Mill

Home
Up
AM Mill
AM3-Mill
AMD Mill
PM Mill
PMO Mill
PMD Mill

Features

The AM milling machine is designed and built for high quality, high production and high precision machining operations.

All machine sliding surfaces are hand scraped and accurately aligned to meet today's high standards for close tolerance machining.

The spindle is hardened and precision ground with a No. 30 milling machine taper, mounted on precision Timken Bearings.

Mill clearances will accommodate most indexing heads, vices and other holding fixtures.

Standard Equipment For AM

Hand lever feeds to head, saddle and table motion with adjustable positive stops

Motor: 2 HP, 1725 RPM, 3 phase, heavy-duty, ball-bearing, totally enclosed, fan-cooled, dual voltage, with forward/reverse drum switch

Belt guard and machine light

Optional Features

	Extra long table (6-1/4" x 25") with 15" of longitudinal travel
	Micrometer feed screw to all motions
	3" riser blocks to raise the head for tall fixtures (max. of two recommended)
	Air hydraulic feed to all motions
	High speed spindles
	Cabinet base
	Coolant systems
	One shot or automatic lubrication of ways
	Variety of special motors with range of HP and RPM
	Complete wiring for standard and special applications

Other optional features custom engineered to specific job requirements.

Basic model AM

AM_R__.JPG__lo-res_copy.jpg (10799 bytes)

AM shown with optional equipment (AM-2)

AM General Specifications

*Table:*	Standard working surface 6-1/4" x 20" with 10" maximum longitudinal travel Optional working surface 6-1/4" x 25" with 15" longitudinal travel
*Saddle:*	Cross travel 4" maximum
*Head:*	Vertical travel 6" maximum (can add riser blocks for additional clearance)
*Spindle:*	No. 30 Milling Machine Taper
*Motor:*	220/440/60/3 - T.E.F.C. - 2 HP Standard speed 1725 RPM Optional 1140 and 3450 RPM
*Color:*	Machine Tool Gray
*Net Weight:*	420 lbs. (machine only) 650 lbs. (machine with cabinet base)
Approximate Shipping Wt:	530 lbs. (machine only) 775 lbs. (machine with cabinet base)

Spindle Speeds

Standard Drive

Motor RPM
1140	1725	3450

350	530	1060
475	715	1430
625	940	1880
800	1200	2400
1020	1530	3060

Low Speed Drive
With Idler Pulley			Direct Drive
Motor RPM			Motor RPM
1140	1725	3450	1140	1725	3450

77	117	234	296	449	898
115	174	378	442	670	1340
161	244	488	618	937	1874

Speeds up to 11,000 RPM available. Consult factory.

Air Hydraulic Feed Specifications:
Feed - Infinitely Variable..........0 to 50 IPM
Rapid Traverse...........................300 IPM
Air Pressure Required..............75 to 120 PSI
Air Cylinder Bore Size...............2-1/2" Dia. Max.