Home
Up
AM Mill
AM3-Mill
AMD Mill
PM Mill
PMO Mill
PMD Mill

Features

 

Rigid reinforced construction with wide dovetail slides and adjustable gibs, providing for accuracy and long life. Anti-friction pre-loaded type bearings support a hardened and ground spindle. The Standard Spindle is hollow and precision ground to take Standard 3-C collets from 1/16 inch to 1/2 inch diameter. The Collet Draw Tube has a clearance hole which will take 1/2 inch diameter stock.

  Standard Equipment
bulletHand lever feeds to head, saddle and table motion with adjustable positive stops
bulletMotor: heavy-duty, ball-bearing, totally enclosed, fan-cooled, dual voltage with forward/reverse drum switch
bulletBelt guard and machine light

  Optional Features
bulletMicrometer feed screw to all motions
bullet2" riser blocks to raise the head for tall fixtures (max. of two recommended)
bulletAir hydraulic feed to all motions
bulletHigh speed spindles
bulletCabinet base
bulletCoolant systems
bulletOne shot or automatic lubrication of ways
bulletVariety of special motors with range of HP and RPM
bulletComplete wiring for standard and special applications

Barker Model PM Milling Machine

 
PM General Specifications
Dimensions: Overall - Width 22-1/4"
Length 24"
Height 18-1/2"
Net Weight 175 lbs.
Shipping Weight 195 lbs.
Range: Table Working Surface -- 4" x 12" -- 1/2" T-Slot
Table-Longitudinal Travel -- 5"
Head-Vertical Travel -- 3"
Saddle-Cross Travel -- 3"

Standard Motor: 1/3 HP -- 1725 RPM -- 115/230 Volt, 60Hz, 1PH -- T.E.F.C.
Drive: "V" Belt
Color: Machine Tool Gray
Spindle: Spindle nose -- #3-C Standard Collet Taper
Spindle capacity -- 1/2" diameter through Collet Draw Tube

 

 
Spindle Speeds
Standard Drive
Motor RPM
1140 1725 3450
570 863 1725
813 1230 2460
1140 1725 3450
1600 2421 4842
2280 3450 6900


Low Speed Drive
Motor RPM
1140 1725 3450
119 180 360
170 257 514
238 360 720
334 505 1010
475 720 1440